CTC TECHNICAL DOCUMENTATIONS

Raw hide - Tannery Footwear Leather goods - Glove-making PPE Environment CSR Training Laboratory analysis and testing

CTC laboratory analysis and testing

Living LAB

Physical, mechanical
and thermal tests

Refashion

Regulatory
chemical tests:
REACH, POPs....

PFAS and
fluorine testing…

Bio-based

Page 2 / 5

Resistance to rough handling (drum test)
The purpose of this determination is to assess the item’s resistance to the rough handling that it might undergo during its life cycle (drops, airport conveyor, etc.) LuggageMechanical resistanceCTC method - CTC-P-BA-014 Dynamic compression test
The purpose of this determination is to check the resistance of luggage to stacking with other luggage (storage, aircraft hold, etc.). The test is primarily relevant for rigid luggage. LuggageMechanical resistanceCTC method - CTC-P-BA-014 Determination of the volume of a luggage
The purpose of this determination is to verify the advertised volume of a piece of luggage or a bag. LuggageMechanical resistanceCTC method - CTC-P-BA-014 Fatigue resistance of handle strap
The purpose of this determination is to assess the quality of the product over time in terms of the grip parts. The weighted item is subjected to cyclic motions in suspension, to reproduce its use (simulating carrying). LeathergoodsMechanical resistanceQBT/2922 Torsion/bending aging
The method based on standard EN ISO 7854, méthode C intended to subject the materials to a torsion/bending test with the aim of analyzing the behavior that the material will have in face of severe use, in terms of their ability to bend under ardouous conditions (garments, shoes, leathergoods). LeathergoodsMechanical resistanceCTC method - CTC-P-DV-02 Flex resistance under load
This test reproduces the stresses to which the materials are subjected during flexing movements, and is used to check that the backing materials have suitable finishes, coatings, etc. It is particularly relevant for shoulder straps, handles, belts, watch straps, etc. LeathergoodsMechanical resistanceBS 5131 § 4.2 Tensile strength of cursor
This test assesses the performance and durability of puller attachment. LeathergoodsMechanical resistanceEN 16732 Annexe B Lateral tensile strength of the chain after tiredness test
This standard is used to evaluate the performance and durability of zip fasteners. LeathergoodsMechanical resistanceEN 16732 Annexe F Lateral opening strength of fastener chain
This standard is used to evaluate the performance and durability of zip fasteners. LeathergoodsMechanical resistanceEN 16732 Annexe G Adhesion of finishing
This test is used to check the adhesion forces between the finish and the leather. This test is used to check whether the leather finish might peel in use. LeathergoodsMechanical resistanceEN ISO 11644 Resistance to cyclic stress under load
The purpose of this determination is to assess the quality of the product over time in terms of the grip parts (handles, straps, etc.). The weighted item is cyclically lifted and put down, to simulate its use. Leathergoods / LuggageMechanical resistanceNF G 92 008 Tensile strength of carry handle
The purpose of this determination is to assess the quality and strength of carrying handles, and their attachment to luggage items or leather goods. Leathergoods / LuggageMechanical resistanceNF G 92 007 Resistance to opening or tensile strength of closure devices
The purpose of this test is to check the push-button fastening system usually found on bags, satchels or suitcases. Leathergoods / LuggageMechanical resistanceNF G 92 006 Pulling strength of straps, shoulder strap....
The purpose of this determination is to assess the quality of straps or shoulder straps, and their attachment to luggage items or leathergoods. Leathergoods / LuggageMechanical resistanceNF G 92 005 Pulling strength of reinforcing rows
The purpose of this determination is to assess the quality of reinforcing rows on materials. Leathergoods / LuggageMechanical resistanceNF G 92 004

Page 2 / 5

This list is not exhaustive and is not representative of all the tests and analysis carried out at CTC.

Physical testing Chemical analysis PPE Footwear Leather goods Glovemaking Standards Leather Standardization Colour

IN THE SAME SECTION

Laboratory analysis and testing
PFAS and fluoride tests

For any information or quote requests

ADVANCED SEARCH

Free search

Test name, objective or principle

Type

Standard

Product

Criteria

Component

FRANCE

Lyon

4, rue Hermann Frenkel
69367 Lyon
Cedex 07
+33 (0)4 72 76 10 10

Paris

+33 (0)1 44 71 71 81

ITALY

Santa Croce
sull´Arno

+39 0571-35110
+39 0571-32459

Arzignano

+ 39 0444-363237

CHINA

Shanghai

+86 21 68 55 50 32

Dongguan

+86 769 23 03 77 70

Hong Kong

+852 3614 0328

VIETNAM

Ho Chi Minh City

+84 8 38 27 44 65

CTC NETWORK

Spain
Tunisia
Bangladesh
Cambodia
India
Indonesia
Pakistan

Contact Keywords Legal notices General terms and conditions Privacy policy Cookie management Site map

© CTC - 2026

Contact
Keywords
Legal notices
General terms and conditions
Privacy policy
Cookie management
Site map

© CTC - 2026

Français / 中文